Uclear HBC 100 PLUS, Руководство пользователя

Страница: 15 / 16

17 14
Music Streaming Operations
To use the helmet communicator with your music devices you must connect
them wirelessly through Bluetooth pairing. This step is only required for Bluetooth
music streaming devices.
Pairing
• To connect the helmet communicator to a Bluetooth music device, hold the Up
and Down buttons for 2 seconds. This puts the helmet communicator into pairing
mode. The status indicator will blink blue and red alternately.
• Next, put the Bluetooth music device into pairing mode. Both the helmet
communicator and the music device should automatically pair together.
After pairing the helmet communicator to a music device, you may use the helmet
communicator to wirelessly listen to music stored on the device.
In order to use the helmet communicator to remotely control the music, the music
device must have Bluetooth Audio/Video Remote Control capability, AVRCP profile.
Play
• To play music, press the Answer button 2 times.
Stop
• To stop music, press the Answer button 1 time.
Fast Forward
• To skip to the next track, press the Up button 2 times.
Backtrack
• To skip to previous track, press the Down button 2 times.
General Operations
Charging the Unit
• To charge the helmet communicator, connect the provided charging cable to the speaker/
charging socket. Upon charging, if the unit is on, the system will automatically initiate
power down.
Volume Control
• The volume control of the helmet communicator can be controlled using the Up and
Down buttons. Pressing the Up or Down button will increase the volume respectively.
The volume control for each mode is independent of each other.
Automatic Speaker Loudness (Communication only)
• The speaker loudness will be automatically adjusted depending on the environment
noise level. However you can still adjust the volume manually.
Automatic Pairing
• The helmet communicator has the ability to connect to the last paired device automatically
for two features
- music and mobile phone.
• Automatic pairing of the helmet communicator with music devices is dependent on the
music devices.
Automatic Profile Switch
• The helmet communicator supports multiple profiles concurrently, but at any point of time
only one profile is active. The automatic profile switch determines which profile should be
active at any point of time starting from the highest priority: (1) Mobile Phone functions
(2) Intercom functions and (3) Music functions.
• The helmet communicator can be paired to more than 1 device.