19
12
Intercom Operations
Intercom, Phone Call and music
Switching
All the intercom units can be connected to phone during operation.
Phone call has the highest priority. If you are currently in intercom mode, incoming call will
interrupt the intercom and after the phone call, intercom will be resumed immediately. If
you are currently having a phone call, incoming intercom request will be rejected.
Music has the lowest priority. If you are in music mode, incoming intercom request will stop
the music and you will be connected to intercom. If you need to switch from intercom to
music mode, you need to disconnect from the intercom by hold the Down button for
2 seconds, music will resume automatically after that.
Other Functions
Firmware Upgrade
•Please check out www.uclear-digital.com for new firmware update
Installation
Your
HBC100 PLUS helmet communicator package comes with
a metal mounting bracket. Use the brackets to install the HBC100 PLUS
control unit onto your helmet.
Install Metal Mounting Bracket
1. Identify a position on the helmet to adhere the Metal
Mounting Bracket.
2. Peel off the double sided tape protective film.
3. Carefully place the Metal Mounting Bracket onto the position identified in step 1.
(You may only do this step once)
4. Apply slight pressure onto the metal mounting bracket to ensure that the metal mounting
bracket is firmly secured.
5. Make sure that permanent metal mounting clip is installed with the 2 side holes at the top
and the metal prong pointing down.
Install Main Unit
1. Identify a position on the helmet to adhere the Metal Mounting Bracket.
2. Slide main unit onto the bracket. You should hear a
‘click’ sound when fully inserted.
3. Fully insert the speaker USB connector.
