11
20
Installation
Install Speakers
GPS Device
To use a GPS device with the UCLEAR HBC100 PLUS, the two must first be paired.
1. Use the Velcro to install the
speakers into the ear cavity of the
helmet.
2. The microphones MUST be placed
facing out.
3. Left and right speakers must be installed
symmetrically.
Microphone
Pairing the HBC100 PLUS to a GPS Device
•Turn on the HBC100 PLUS helmet communicator and GPS device
•To connect the helmet communicator to a GPS device, hold the Up and Down buttons
for 2 seconds. This puts the helmet communicator into paring mode. The status indicator
would blink blue and red alternately.
•Next, turn on the GPS device Bluetooth functions and search for Bluetooth audio devices.
Select
‘HBC100 PLUS’ to pair with the desired device.
•If your GPS device prompts for a passcode, enter ‘0000’.
•Your GPS device will confirm that pairing has succeeded.
*Note: To make calls through the HBC100 PLUS, you may need to pair your mobile phone to
the GPS device by following the instructions of the GPS device.
4. Make sure the speaker wire is inserted into the main unit.
lnsert the speaker wire into the control unit until you can no longer see the
3 ribs on the speaker wire plug.
