38
7-2-1. To adjust the Top Margin:
You can adjust the Top Margin with the SW2 DIP Switches. You have 16 steps (1 step:
0.125mm) by setting four toggle switches (#5, #6, #7 and #8). See the table 7-A.
Note: Changes of the DIP Switches affect the Top Margins of all Cutting Modes.
#5
#6
#7
#8
Adjusting
amount
(mm)
0
0
0
0
-1.000
1
0
0
0
-0.875
0
1
0
0
-0.750
1
1
0
0
-0.625
0
0
1
0
-0.500
1
0
1
0
-0.375
0
1
1
0
-0.250
1
1
1
0
-0.125
0
0
0
1
±0.000
1
0
0
1
+0.125
0
1
0
1
+0.250
1
1
0
1
+0.375
0
0
1
1
+0.500
1
0
1
1
+0.625
0
1
1
1
+0.750
1
1
1
1
+0.875
*The other way of adjusting Top Margin:
1.
Press the Adjust Top margin button on the Operation Panel and the “Top margin”
LED will turn on and the Top Margin value used in the last job will appear.
2.
When you browse Cutting Modes, the standard Top Margin length for each Cutting
Mode appears.
3.
Press
p
or
q
to increase/decrease the Top Margin length one step (0.25mm) at a
time.
4.
Press the Adjust Top margin button to save the value and return to the Counter
Display. Refer to the Operation Manual for more details.
Table 7-A: Switch settings for Top Margin Adjustment (0=Off, 1=On)
