34
Troubles
Possible Cause
Action
The atmosphere is too dry and
static electricity affects.
Try a humidifier to make the
atmosphere more humid than
50%.
12.
With the cutting
mode set to “double
cut,” cut fragments go
forward and cause
fouling.
The BC-10 is not grounded
and affected by static
electricity.
Make sure the machine is
grounded.
13.
The BC-10 does
not respond to
command inputs.*
The Onboard Microcomputer
has been affected by an
electromagnetic noise.
Turn off the Power Switch.
Wait seven seconds and turn
the power back on. This
procedure resets the
microcomputer.
The Paper Feeder Tray is
skewed.
Reattach the Paper Feeder
Tray properly.
14.
Finished cards are
not rectangles, more
like diamonds.
The Pressure Roller Unit is not
set properly.
Make sure the Unit is set
neatly in its regular position.
*1, 2, 3, and 13: If all of the items in each section have been checked and the problems
are still unresolved, the BC-10 needs to be repaired.
If problems continue after checking all the items above, call for service.
