33
Troubles
Possible Cause
Action
A paper fragment has been
caught between a Slitter Disc
and a spring inside the Slitter
Unit. (When the short sides of
finished cards are not crisp.)
Remove the fragment.
The paper curls or waves too
much to be conveyed
smoothly.
Remove the paper from the
Paper Feeder Tray and
straighten it.
The paper has so much friction
that it cannot be conveyed
properly.
Try some other papers with
less friction.
8.
The lengths of
finished cards are
unequal (more than
0.15mm).
The paper is so wide as to
have too much friction against
the Paper Guides.
Use proper papers.
9.
Cutting accuracy is
good, but the positions
of printed images are
uneven.
The
layout
is
not
good.
Redo
the
layout.
Excessive static electricity is
affecting the machine.
Turn off the Power Switch.
Wait seven seconds and turn
the power back on. Keep the
humidity between 50 and 80%.
Make sure the machine is
grounded.
10.
The Display does
not operate correctly.
The BC-10 is out of order.
Call for service.
The BC-10 is not grounded
and affected by static
electricity.
Make sure the machine is
grounded.
11.
Finished cards do
not accumulate neatly
in the Card Stacking
Box or cut fragments
get scattered in the
Trash box.
The atmosphere is too dry and
static electricity affects.
Check the humidity and try a
humidifier if needed.
