6)))
'%.%2!,3!&%4925,%3
1. Do not use P.A.T. tools in explosive or flammable environments.
2. Never leave a P.A.T. tool unattended in a place where it would be
available to unauthorized personnel.
3. A warning sign (8" x 10" with 1" letters min.) must be posted in plain
sight in areas where P.A.T. tools are being used as adjacent areas
where wall, floor, or work surface pentration by the fastener by pose
a hazard. The wording on the sign should be similar to "Powder
Actuated Tools in Use".
4. Operators and co-workers should always wear safety goggles, ear
and head protection when powder actuated tools are in use.
5. Always maintain good balance when working on ladders, scaffolds,
etc.
6. Never load the tool until ready to make a fastening. When using a
tool that uses multiple booster strips, always insert the fastener into the
tool prior to advancing to a "live" cartridge.
7. Always operate the tool at right angles to the work surface (to
minimize the chance of the fastener deflecting off the work surface).
9. Never carry fasteners or other sharp objects in the same pocket or
apron section with power loads as they may strike the cartridge and
cause it to fire.
10. Only operators who are trained for a specific P.A.T. tool are allowed
to use that P.A.T. tool. The fact that an operator is qualified by another
P.A.T. tool manufacturer does not mean that he is authorized to
operate a UCAN Fastening Products' tool. An operator must be
trained for each tool he uses, even though he may already be trained
for another P.A.T. tool made by the same manufacturer.
7 ! 2 . ) . '
&!),52% 4/ &/,,/7 4(%3% 3!&%49 25,%3 -!9 2%35,4
). $%!4( /2 3%2)/53 ).*529
7!22!.49
This new fastening tool is a quality product of UCAN Fastening Products. It
has been developed through study and research into the fastening
methods and applications of the building industry and associated trades.
Every reasonable precaution has been taken in the manufacturing of this
tool to assure its compliance with UCAN Fastening Products' standards of
high quality. Consultation on the operation and maintenance of the tool
is available from your local UCAN Fastening Products' Distributor.
ONE YEAR LIMITED WARRANTY: For 1 year from the date of shipment, the
original purchaser of the tool will not be charged for the parts and labour
required to correct defects in materials and workmanship, provided the
tool is returned to a UCAN Fastening Products Distributor for servicing and
inspection, the serial number has not been removed or defaced, only
UCAN compatible consumables and parts have been used with the tool,
and no unauthorized servicing has been performed. The warranty does
not cover normal wear and tear and the cost of shipping and insurance.
THIS IS THE ONLY WARRANTY AND GUARANTEE MADE BY UCAN FASTENING
PRODUCTS, AND IT IS GIVEN IN LIEU OF ALL OTHER (EXPRESSED OR IMPLIED)
WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND
OF FITNESS FOR A PARTICULAR PURPOSE. Under no circumstances will
UCAN Fastening Products be obligated for incidental or consequential
damages, losses, or expenses in connection with, or by reason of, or
inability to use the tool for any purpose.
