Authentication Type:
choose the one of the following modes.
Open
– the LiteStation2 is visible to all devices on the network.
Shared Key
– allows communication only with other devices with
identical WEP settings.
WEP
(Wired Equivalent Privacy) is based on the IEEE 802.11
standard and uses the RC4 encryption algorithm. Enabling WEP
allows you to increase security by encrypting data being transferred
over your wireless network. Enable a WEP security:
WEP with the same encryption
settings must also be enabled on
wireless devices on your
network.
Figure 6 – Configuration of the WEP Security
WEP Key Length:
select the Key length here, either 64-bits, or 128-
bits.
Key Index:
specify the Index of WEP Key.
WEP Key:
enter the encryption key to be used to encrypt and decrypt
wireless traffic:
For
64-bits
– specify pre-shared key as 5 HEX (0-9, A-F, and a-f)
pairs (e.g. 0011223344).
For
128-bits
– specify pre-shared key as 13 HEX (0-9, A-F, and
a-f) pairs (e.g. 00112233445566778899AABBCC).
WPA
with Preshared Key offers improved data encryption through the
Temporal Key Integrity Protocol (TKIP). By using TKIP, the security
keys change at set intervals, creating a network that is more secure
than WEP encryption. Enable WPA security:
WPA with the same encryption
settings must also be enabled on
wireless devices on your
network.
Figure 7 – WPA Security Settings
WPA Preshared Key:
enter a WPA encryption passphrase. The
preshared key is an alpha-numeric password between 8 and 63
characters long.
11
Содержание LiteStation2
Страница 1: ...LiteStation2 User s Guide...