Ubiquiti LiteStation2, Руководство пользователя, Страница: 10 / 17

Select: click to associate chosen wireless network with the subscriber
station LiteStation2.
Scan: click to refresh the wireless network table.
Close this window: click to close Site Survey window.
Country Code: choose from drop-down list the country in which you
will use the subscriber station LiteStation2.
Output Power: specify the wireless card output power at which your
client adapter transmits data in dBm using slider. When entering
output power value manually, the slider position will change according
to the entered value. The transmit power level that is actually used is
limited to the maximum value allowed by your country's regulatory
agency.
IEEE 802.11 Mode: select the IEEE 802.11 mode of your wireless
network.
B only – allows connection to 802.11b networks.
B/G Mixed – allows connection to 802.11b and 802.11g networks.
G only – allows connection to 802.11g networks.
G Dynamic Turbo – connect to the wireless network that
supports 802.11g Dynamic Turbo mode for data rates up to 108
Mbps
.
The list of data rates will vary
according the selected IEEE
802.11 mode.
Data Rate: choose the data rates in Mbps at which LiteStation2
should transmit packets to or receive packets from Access Point. Use
Auto option if you are having trouble getting connected or losing data
at a higher rate. In this case the lower data rates will be used by
station automatically.
Wireless Security
This section enables you to set parameters that control how the
subscriber station associates to a wireless device and encrypts and
decrypts data:
Figure 5 – Wireless Security Settings
Security: select the encryption method.
None – disable security.
WEP – enable WEP encryption.
WPA – enable WPA with preshared key encryption.
10