Ubiquiti airFiber AF-5XHD, Быстрый старт

Страница: 6 / 46

Link LED
Signal Level Once fully booted, the Signal 1-4 LEDs act as a bar graph showing how close the
AF-5XHD is to ideal aiming. This is auto-scaled based on the link range, the antenna gains, and
the con gured TX power of the remote AF-5XHD. Each Signal LED has three possible
states: On, Flashing, and Off. All Signal LEDs would be solidly on in an ideal link. If the link has a
1 dB loss, the Signal 4 LED will ash; a 2 dB loss and the Signal 4 LED will turn off. The full bar
graph LED states are shown below.
dB loss
0 -1 -2 -3 -4 -5 -6
-7 -8 -9 -10 -11 -12 -13
Off RF Off
Syncing
Beaconing
Registering
On Operational
AF-5XHD Quick Start Guide