Ubiquiti airFiber AF-5XHD, Быстрый старт

Страница: 2 / 46

IP67 Upgrade Kit
(Vent and Gasket)
Gigabit PoE (24V, 1A) with
Mounting Bracket
Power Cord
Antenna Compatibility
The airFiber AF-5XHD radio is designed for use with the following airFiber X antenna models:
AF-5G23-S45
AF-5G30-S45
AF-5G34-S45
The AF-5XHD can also operate with the following RocketDish™ antenna models:
RD-5G30*
RD-5G34*
* Requires Universal Bracket (included) or AF-5G-OMT-S45 Conversion Kit (not included).
Installation Requirements
Clear line of sight between airFiber radios
Clear view of the sky for proper GPS operation
Vertical mounting orientation
Mounting point:
At least 1 m below the highest point on the structure
For tower installations, at least 3 m below the top of the tower
Ground wires – min. 10 AWG (5 mm ) and max. length: 1 m. As a safety precaution, ground the
airFiber radio to grounded masts, poles, towers, or grounding bars.
WARNING: Failure to properly ground your airFiber radio will void your warranty.
(Recommended) 2 Outdoor Gigabit PoE surge protectors
2
AF-5XHD Quick Start Guide