Ubiquiti airFiber AF-5XHD, Быстрый старт

Страница: 16 / 46

6. Con gure the following settings:
a. For one AF-5XHD, enable Master Mode. For the other AF-5XHD, disable Master Mode.
b. Enter a name in the Link Name eld. This should be the same on both the Master and the
Slave.
c. Select your Country.
d. If needed, change the Channel Bandwidth, Frequency, Output Power (EIRP), Antenna Gain,
and Max TX Modulation settings. The Channel Bandwidth and Frequency should be the
same on both the Master and the Slave.
e. In the Security Key eld, enter a combination of alphanumeric characters (0-9, A-Z, or a-z).
7. Click Save Changes.
8. Con gure each airFiber radio with a unique IP address for the Data port:
a. Click the icon.
b. For both the Data IP Address and Management IP Address options:
DHCP Have your router use DHCP reservation to assign a unique IP Address.
Static Change the IP Address, Netmask, and other settings to make them compatible
with your network.
c. Click Save Changes.
Repeat the instructions in the airFiber Con guration section on the other AF-5XHD radio.
For details on the airFiber Con guration Interface, refer to the airFiber AF-5XHD User Guide,
available at: ui.com/download/air ber
Upgrade for IP67 Compliance
1.
Note: U.S. product versions are locked to the U.S. Country Code to ensure
compliance with FCC regulations.
Note: The key is an alphanumeric password between 8 and 63 characters long.
AF-5XHD Quick Start Guide