manualshive.com logo in svg

Ubiquiti AF-3X, Руководство пользователя

Поделиться
Скачать
Ubiquiti AF-3X Скачать руководство пользователя страница 20

14

Chapter 4: Main Tab

airFiber

®

 X User Guide

Ubiquiti Networks, Inc.

The following applies to the AF-5X only:

When the AF-5X operates in a DFS country and within a 
valid DFS band for that country, it performs a Channel 
Availability Check (CAC) before operating. The rules vary 
by country and frequency, but in general:

 -

FCC domains 

If the AF-5X operates in a DFS band 

(5.2 GHz or 5.4 GHz band), the AF‑5X performs a 

60-second check on the 

Master only. 

 -

ETSI domains 

For most frequencies, the AF-5X 

performs a 60-second check on the 

Master

 and 

Slave

; 

however, if it operates in the 5600‑5650 MHz range, 

then the AF-5X performs a 10-minute check.

While the AF-5X is performing this check, the 

RF Link 

Status

 displays 

DFS CAC

, and the 

RF Link Timeout

 is 

displayed.

If radar is detected, the 

RF Link Status

 displays 

RADAR 

Detected

, and the 

RF Link Timeout

 is displayed.

RF Link Timeout 

(Available only if the 

RF Link Status

 

is 

DFS CAC

 or 

RADAR Detected

.) During the 

DFS CAC

 or 

RADAR Detected

 state, the 

RF Link Timeout

 counts down 

the time remaining before the AirFiber X radio can move 

to the next RF link state.

Link Name 

Displays the name of your link.

Security 

AES-128 is enabled at all times.

Version 

Displays the airFiber Configuration Interface 

software version.

Uptime 

This is the total time the device has been running 

since the latest reboot (when the device was powered up) 
or software upgrade. The time is displayed in days, hours, 
minutes, and seconds.

Link Uptime 

This is the total time the airFiber link has 

been continuously operational. The time is displayed in 
days, hours, minutes, and seconds.

Remote MAC 

Displays the Management Ethernet MAC 

address of the remote AirFiber X radio.

Remote IP 

Displays the Management Ethernet IP address 

of the remote airFiber X radio.

Date 

Displays the current system date and time. The 

date and time are displayed in YEAR‑MONTH‑DAY 
HOURS:MINUTES:SECONDS format. The system date and 

time is retrieved from the Internet using NTP (Network 
Time Protocol). The NTP Client is enabled by default on the 

Services tab. The AirFiber X radio doesn’t have an internal 

clock, and the date and time may be inaccurate if the 

NTP Client is disabled or the device isn’t connected to the 

Internet. 

Frequency 

(Available if split frequencies are not enabled.) 

Displays the current frequency. The AirFiber X radio uses 
the radio frequency specified to transmit and receive data. 

TX Frequency 

(Available if split frequencies are enabled.) 

Displays the frequency that the airFiber X radio uses to 

transmit data. 

RX Frequency 

(Available if split frequencies are enabled.) 

Displays the frequency that the airFiber X radio uses to 
receive data. 

Channel Width 

Size of the channel in MHz.

Frame Length 

Displays the currently configured frame 

length of the radio: 

2.0ms

, 

2.5ms

, 

4.0ms

, or 

5ms

. Longer 

frame lengths result in higher throughput for a given 
configuration, but also result in slightly higher latency.

Duty Cycle 

Displays the duty cycle.

Regulatory Domain 

Displays the regulatory domain 

(

FCC/IC

, 

ETSI

, or 

Other

), as determined by country 

selection.

Chain 0/1 (Actual/Ideal) 

Displays the actual and ideal 

power levels (in dBm) of the received signal for each chain.
The actual number indicates the current RX signal 
strength. The ideal number is the RX signal strength of a 
perfectly aligned link. These two numbers indicate exactly 
how many dB out of alignment the system is.  
When the link is aimed correctly, the bar graphs are full-
scale. If the bar graphs are not full-scale, they indicate that 
your link is not optimally aimed.

Rem Chain 0/1 (Actual/Ideal) 

Displays the actual and 

ideal power levels (in dBm) of the received signal for each 

chain of the remote airFiber X radio. The bar graphs will 

display as full-scale once the link is aimed correctly. 

Local Modulation Rate 

Displays the modulation rate: 

•  8x (256QAM MIMO)
•  6x (64QAM MIMO)
•  4x (16QAM MIMO)
•  2x (QPSK MIMO)
•  1x (½ Rate QPSK xRT

™

*) 

•  ¼x (¼ Rate QPSK xRT)
*xtreme Range Technology
If 

Automatic Rate Adaptation

 is enabled on the 

Wireless

 

tab, then 

Local Modulation Rate

 displays the current speed 

in use and depends on the 

Maximum Modulation Rate 

specified on the 

Wireless

 tab and current link conditions.

Remote Modulation Rate 

Displays the modulation rate 

of the remote airFiber X radio: 

•  8x (256QAM MIMO)
•  6x (64QAM MIMO)
•  4x (16QAM MIMO)
•  2x (QPSK MIMO)
•  1x (½ Rate QPSK xRT) 
•  ¼x (¼ Rate QPSK xRT)

TX Capacity 

Displays the potential TX throughput, how 

much the airFiber X radio can send, after accounting for 

the modulation and error rates.

Содержание AF-3X































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды