9
Support and Technical Specifications:
Model AP6: UBH-H-WI
Model APAI: UBH-H-AI
FCCID: 2AECKUBH01
Contains FCCID: XMR201903EG25G
Contains FCCID: XMR201807EP06A
UBIHUB TYPICAL SPECIFICATIONS
Power
Operating Temperature:
-40° C to 50° C
Input Voltage:
100-480 VAC
Max Current:
1.5A
Max Power:
95W
Frequency:
50/60 Hz
Power Metering
ANSI C12.20, class 0.5
Max Load Power
1200W
Product Characteristics
Weight
4.5kg / 9.92 lb
Dimensions
386mm x 208mm x 70mm
Warranty
5 Years
Certifications
Safety
ETL US
UL 62368
FCC
Part 15 Subpart C,
Part 15 Subpart B, Class B
Part 15 Subpart E
Ingress Level
IP65
Impact Rating IK07
Vibration
ANSI C136.31
Installation Characteristics
Mounting
Cobra head luminaire mount
2 3/8 inch pole
Cobra head luminaire mount
1.25 inch pole
Operating Humidity
Up to 90%
Wind Survivability
Up to 241km/h (150 mi/h)
Altitude
Max 2000 m
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by Ubicquia, Inc. could
void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and , if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
RF
Antenna Type
Passive antennas
4-in-1 MIMO, flexible PCB monopole
type antenna optimized for WiFi 6
frequencies
Antenna Gain
Up to 6dBi
Peak Transmit Power 2.4GHz: 26dBm
(Tx port/chain +
5GHz: 26dBm
combining gain)
5GHz: 26dBm
Frequency bands
ISM (2.4-2.484GHz)
U-NII-1 (5.15-5.25GHz)
U-NII-2A (5.25-5.35GHz)
U-NII-2C (5.47-5.725GHz)
U-NII-3 (5.725-5.895GHz)
LTE Module Options supported
