manualshive.com logo in svg

ubicquia UBH-H-AI, Руководство по установке, Страница: 10 / 10

Поделиться
Скачать
ubicquia UBH-H-AI Скачать руководство пользователя страница 10

© 2021 Ubicquia Inc.  |  All rights reserved. Patent pending. Public use approved.  |  2058 v2 October 2021

www.ubicquia.com

Safety Statements and Warnings

This product has been ETL listed and complies with U.S. product safety 

standards.

WARNING

 statements describe conditions that may lead to personnel 

injury including potentially fatal injuries if the device is not properly 

installed and warnings are not properly followed.

CAUTION

 statements describe conditions that may lead to equipment 

damage.

• Electrical shock can cause serious or fatal injury. Only qualified personnel

should install, maintain or troubleshoot this equipment.

•

Installation must be carried out strictly according to the steps in this

manual, including use of relevant tools and equipment as required. For

example: safety gloves, device tether, warning labels, flash lamp, helmet,

and/or work clothes, etc.

•

In the process of installation, please ensure the weather is suitable for

outdoor high power electrical work. If possible, the installer should avoid

installing in the rain, or allowing the NEMA to get wet.

WARNING

 

•

The product is required to be installed and to be connected to mains

power by a skilled or qualified personnel in accordance with local and

national codes or regulations.

•

Suitably rated approved circuit breaker is to be attached during end

installation as per applicable local and national codes or regulations.

•

Suitable lightning arrester is intended to be installed during end

installation as per applicable local and national codes or regulations.

WARNING

 

RF Exposure Compliance - to meet FCC and ISED limits for RF 

exposure, this device must be installed to provide a separation distance 

greater than 40 cm from all persons during normal operation.

Содержание UBH-H-AI











Отзывы:

Нет отзывов