UBI EasyCoder 201 II E
UBI EasyPak 501 E – Getting Started
10
LOAD PAPER
The UBI EasyCoder 501 E printer lets you print and
feed out labels or tickets in two ways.You can either
feed out the paper web and tear it off, or you can let the
printer separate (dispense) the label from the backing
paper.
❏
Tear-Off
1
Lift the green printhead lever counter-
clockwise.
2
Fit a new paper roll on the paper
supply spool.
3
Thread paper as shown in the pic-
ture.
4
Adjust the green ring to guide
paper.
5
Turn the printhead lever clockwise.
6
Feed out at least one label. To tear off
paper, pull it downwards.
❏
Peel-Off
1
Lift the green printhead lever counter-
clockwise.
2
Fit a new paper roll on the paper supply
spool.
3
Open the front lid.
4
Thread paper as shown in the pic-
ture.
5
Remove the labels from the first
25 cm (10") of the paper web.
Wrap the backing paper around the
print roller and dispenser shaft. Then
thread it under the print mechanism and to the
backing paper take-up.
6
Wind up the backing paper at least half a turn
manually on the backing paper take up. Secure
the backing paper using the green clips.
7
Adjust the green ring to guide paper.
8
Turn the printhead lever clockwise.
9
Close the front lid.
10
Feed out at least one label.
