UBI EasyCoder 401, Техническое руководство

Страница: 32 / 64

32
UBI EasyCoder 401 – Technical Manual
SELECTING PAPER/RIBBON, cont'd.
Direct Thermal Printing
STANDARD SETUP OPTIONS
Supplier Type Quality Setup Option
Kanzan
1
KL-46B Top coated KANZAKI 86S
Ricoh 130 LAB/LAM Top coated RICOH 130LAB/LAM
UBI Economy Non top coated UBI DT 110
Premium Top coated UBI DT 110
The paper settings above are optimized for bar code printing. This
may cause an impression of a somewhat weak printout for pure text
and image printing. Increasing the energy to the printhead will
make the printout blacker at the expense of the quality of bar codes.
When extra black printout is desired, use one of the following setup
options (direct thermal printing only):
UBI DT 110+ 15% more energy to printhead.
UBI DT 110++ 30% more energy to printhead.
Due to the increased amount of energy to the printhead, a more
frequent cleaning of the printhead is recommended if preprint or
varnishes are used on the thermal paper in connection with these
setup options.
In addition to the standard options above, there are some thermal
paper with similar characteristics, which also can be used, although
UBI does not guarantee the same printout quality, especially not at
vertical bar code printing (“ladder style”).
Supplier Type Quality Setup option
Appleton T1062A Top coated UBI DT 110
T0972 Top coated UBI DT 120
Blümberg T1968 SN Non top coated UBI DT 110
Fasson US 90HC Top coated UBI DT 110
Jujo AP62KM-A Non top coated UBI DT 110
TP62KM-A6 Non top coated UBI DT 110
TP63KS Semi top coated UBI DT 120
Kanzaki KPT-86RS Top coated 2 UBI DT 120
Ricoh 130IAB Top coated
2
UBI DT 110
130NA Top coated
3
UBI DT 110
130LEB-E Non top coated UBI DT 110
Smith & McLaurin T953 Non top coated UBI DT 110
Tomoegawa LPB-70BT Top coated UBI DT 120
Printhead Warranty:
The use of direct thermal papers, other than those specified above,
may result in premature wear-out of the printhead and the printhead
warranty will not apply.
1
/. Same as Kanzaki KPT-86S
2
/. IR-readable
3
/. Tag 150 g/m
2