UBI EasyCoder 401, Техническое руководство

Страница: 13 / 64

13
UBI EasyCoder 401 – Technical Manual
The setup allows you to adapt the printer for the desired type of
computer communication and to control the printing. The setup
parameters are:
General Information
Parameter Options Default 1
❑
Contrast Variable (0–10) Middle (5)
❑
Ser-Com 2 :
◆
Baudrate 300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 9600
◆
Parity even | odd | mark | space | none none
◆
Char length 7 bits | 8 bits 7 bits
◆
Stop bits 1 bit | 2 bits 2 bits
◆
Flow control:
- RTS/CTS
Enable | disable disable
- ENQ/ACK Enable | disable disable
- XON/XOFF, data from host Enable | disable enable
- XON/XOFF, data to host Enable | disable enable
◆
New line CR/LF | LF | CR CR/LF
❑
Detection :
◆
LSS adjust Variable n.a.
◆
Feedadj:
- Startadj
Variable
±
0
- Stopadj Variable
±
0
❑
Service :
◆
Media size:
- X-start
Variable (0 – 831) 0
- Width Variable (0 – 832) 832
- Length Unlimited 1200
◆
Media type: Label (w gaps) | Ticket (w mark) | Ticket (w gaps) |
Fix length strip | Var length strip
Label (w gaps)
◆
Print defs:
- Head resist
Set automatically at startup n.a.
- Paper type Select supply option. See chapter “Selecting Paper/Ribbon” UBI HP 20
- New supplies Select a new type of supply by means of a 13-digit code n.a.
- Testprint A series of test labels can be printed n.a.
◆
Performance
3
: Normal | High | Ultrahigh Normal
◆
Memory alloc:
- Image buff size
Variable (max. 250 kbyte) 48 kbyte
- Rec buf size
2
Variable 300 byte
- Trans buf size 2 Variable 300 byte
SETUP PARAMETERS
1 /. “Default” refers to the default setup values in the standard configuration EPROM's. A custom-made printer fitted with
non-standard configuration EPROM's may have a different combination of default setup values.
2
/. There is no communication setup and no receive and transmit buffers for the optional parallel communication channel.
3
/. All three options relate to the same nominal print speed.