37
UBI EasyCoder 401 Linerless – Technical Manual
The Label-Taken Sensor (LTS) is a device, which enables the
printer's software to detect if the latest printed label, ticket, tag etc.
has been removed before printing another copy.
The label-taken sensor is available i two cases:
• Fitted as standard in the cutter of all EasyCoder 401 LLC printers.
• As a kit for upgrading of EasyCoder 401 LLT printers
1
.
In the EasyCoder 401 LLT, the label-taken sensor consists of a
photoelectric sensor with a bracket and a connection cable. The
sensor is fitted inside the front door, see illustration below.
The photoelectric sensor emits a narrow beam of light, which will
be reflected back to the sensor by any label, ticket, tag, piece of strip
or backing paper, that has not been removed from the outfeed area.
A prerequisite is that the web is fed out along the inner wall of the
printer.
The sensitivity can be adjusted by means of a potentiometer, as
described on next page.
Continued!
General Information
LABEL-TAKEN SENSOR
Power
Ready
Error
EasyCoder 401
Label-Taken Sensor
1
/. When field-installing an LTS in an
EasyCoder 401 LLT printer, the cable
fitted between P-606 on the CPU board
and the cutter interface connector must
be disconnected from the CPU board
and replaced by the cable from the LTS.
