UBI EasyCoder 401 Linerless, Техническое руководство

Страница: 15 / 62

15
UBI EasyCoder 401 Linerless – Technical Manual
1 /. “Default” refers to the default setup values in the standard configuration EPROM's. A custom-made printer fitted with
non-standard configuration EPROM's may have a different combination of default setup values.
2
/. There is no communication setup and no receive and transmit buffers for the optional parallel communication channel.
3
/. All three options relate to the same nominal print speed.
4
/. Special Feedadjust, Media Type, and Paper Type setup values for EasyCoder 401 Linerless are stored in RAM before
delivery from factory and will have precedence over the standard default values stored in EPROM (same as those of the
non-linerless EasyCoder 401). In case of memory loss or memory reset, the values stored in RAM will be replaced by
those in EPROM. However, you can set up the printer again according to the default values in the table above or to your
own preferences, e.g. by means of UBI Shell. (For default paper type setup, enter “0100023122623” in “New Supplies”).
The setup allows you to adapt the printer for the desired type of
computer communication and to control the printing. The setup
parameters are:
General Information
Parameter Options Default 1
❑
Contrast Variable (0–10) Middle (5)
❑
Ser-Com 2 :
◆
Baudrate 300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 9600
◆
Parity even | odd | mark | space | none none
◆
Char length 7 bits | 8 bits 7 bits
◆
Stop bits 1 bit | 2 bits 2 bits
◆
Flow control:
- RTS/CTS
Enable | disable disable
- ENQ/ACK Enable | disable disable
- XON/XOFF, data from host Enable | disable enable
- XON/XOFF, data to host Enable | disable enable
◆
New line CR/LF | LF | CR CR/LF
❑
Detection :
◆
LSS adjust Variable n.a.
◆
Feedadj
4
:
- Startadj Variable
±
LLT: 0 LLC: -294
- Stopadj Variable
±
LLT: 0 LLC: +250
❑
Service :
◆
Media size:
- X-start
Variable (0 – 831) 0
- Width Variable (0 – 832) 832
- Length Unlimited 1200
◆
Media type 4 : [Label (w gaps)] | Ticket (w mark) | [Ticket (w gaps)] | LLT: Ticket (w mark)
Fix length strip | Var length strip LLC: Var length strip
◆
Print defs:
- Head resist
Set automatically at startup n.a.
- Paper type 4 Select supply option. See chapter “Selecting Paper” 0100
- New supplies Select a new type of supply by means of a 13-digit code n.a.
- Testprint A series of test labels can be printed n.a.
◆
Performance
3
: Normal | High | Ultrahigh Normal
◆
Memory alloc:
- Image buff size
Variable (max. 250 kbyte) 48 kbyte
- Rec buf size
2
Variable 300 byte
- Trans buf size 2 Variable 300 byte
SETUP PARAMETERS