Uberhaus 70005031, Руководство оператора

Страница: 24 / 52

24
TROUBLESHOOTING
Check for proper burner flame characteristics. Burner flames should be blue and stable with no yellow
tips, excessive noise,The following steps should be followed for correcting the flame characteristics:
1. Turn the control knobs and propane Cylinder valves “OFF.”
2. Allow the grill and burners to cool.
3. If the flame is yellow (not enough air), turn the adjustment screw found at the front of the burner
counterclockwise.
4. If the flame is noisy or lifts away from the burner (too much air), turn the adjustment screw clockwise.
If these adjustments do not correct the problem, contact customer service at 1-866-206-0888
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-206-0888, 8 A.M. – 6 PM., EST,
Monday – Friday.
REF# DESCRIPTION
QTY REF# DESCRIPTION QTY
1 Cart caster insert 2pcs 23 Cooing grid 1pc
2 Bottom panel 1pc 24 Flame tamer 1pc
3 Gas tank support 1pcs 25 Main burner 1pc
4 Cart Leg .right 1pcs 26 Side shelf, left 1pc
5 Tank Heat Shield 1pc 27 BBQ body hinge 2pcs
6 Heat shield 1pc 28
Back panel
1pc
7 Gas valve 2pcs 29 Left side shelf bracket ,rear 2pcs
8 Control knob 2pc 30 Left side shelf bracket ,front 2pcs
9 Pulse Ignite module 1pcs 31 Lighting Rod 1pc
10 Main control panel 1pc 32 Grease box hooking 1pc
11 Main burner bowl assembly 1pc 33 Grease box 1pc
12 Right side shelf bracket ,front 1pc 34 Cart leg ,left 1pc
13 Cart frame 1pc 35 Regulator ,LP 1pc
14 Right side shelf bracket ,rear 1pc 36 Hose clamp 1pc
15 Side shelf, right 1pc 37 Wheel cover 2pcs
16 Main lid handle tube 1pc 38 Wheel cover 2pcs
17 Main lid handle heat insulating spacer 2pcs 39 Wheel axle 1pc
18 Temperature Gauge 1pcs 40 Handle heat insulating plate 1pc
19 Main Lid 1pc 41 Gas tank heat insulating plate 1pc
20 Main lid hinge 2pcs 42 Wheel axle sleeve 2pcs
21 warming rack 1pc Hardware package 1pc
22 warming rack bracket 1pc Manual 1pc
Problems Possible Solutions
Low heat generated with knob
in “HIGH” position.
1. Make certain the problem is isolated to only one burner. If it
appears so, clean the orifice and burner, clearing ports of any
obstruction.
2. Check for a bent or kinked fuel hose.
3. Make sure the air shutter is properly adjusted.
4. Check for proper gas supply and pressure.
5. Pre-heat the grill for a full 15 minutes.
6.
Check if propane cylinder is empty.