Uberhaus 70005031, Руководство оператора

Страница: 18 / 52

18
INSTALLATION INSTRUCTIONS
GAS HOOK-UP
Only the pressure regulator and hose assembly supplied with the grill should be used. Any replacement
pressure regulator and hose assembly must be provided by the grill manufacturer.
This grill is configured for Liquid Propane only. Do not use a Natural Gas supply.
Total gas consumption (per hour) with all burners set on “HIGH”:
Main burners 24,000 BTU/Hr.
Total
24,000 BTU/Hr.
The installation of this appliance must comply with local codes or, in the absence of local codes, with
either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, National Gas Propane Installation Code, CSA
B149.2.
Installation in Canada must be in accordance with the Standard CAN/CGA-B149.2 (installation code for
gas burning appliances and equipment) and local codes.
LIQUID PROPANE CYLINDER REQUIREMENTS
(20-lb. Cylinder)
A dented or rusty propane cylinder may be hazardous and should be checked by your supplier. Never
use a cylinder with a damaged valve. The propane cylinder must be constructed and marked in
accordance with propane cylinder specifications by the National Standard of Canada, CAN/CSA-B339,
Cylinders, Spheres and Tubes for Transportation of Dangerous Goods Commission.
The 20-lb. cylinder must have a shut-off valve terminating in a valve outlet specified, as applicable, for
connection type QCC1 in the standard for compressed gas cylinder valve outlet and inlet connection
ANSI/CGA-V-1.
Storage of an outdoor cooking gas appliance indoor is permissible only if the cylinder is disconnected and
removed from the outdoor cooking gas appliance. The cylinder system must be arranged for vapour
withdrawal. The cylinder must include a collar to protect the cylinder valve.
Manifold pressure: (operating) 10 inches water column (W.C.), (non-operating) 11.2 inches water column
(W.C.).
Propane cylinders must be provided with a listed overfilling prevention device.
Remove the plastic valve cover from the propane cylinder. Make sure the grill gas hoses do not contact
the grease pan or grill firebox when the propane cylinder is placed into the cart.
CONNECTING THE PROPANE CYLINDER
To connect the propane cylinder:
a) The cylinder valve should be in the “OFF” position. If not, turn the valve
clockwise until it stops.
a) Make sure the cylinder valve has the proper type-1 external male thread
connections as per ANSI Z21.81.
b) Make sure the grill burner valves are in the “OFF” position.
c) Inspect the valve connections, port and regulator assembly. Remove debris and inspect the hose
for damage.