TIMER-OFF: The timer-off is used to turn off the unit automatically after the setting time is
over.
1. Press the "TIMER" key at operating mode status to set the time desired.
2. Once the set hour has come to an end, the unit will turn off automatically.
3. By pressing the "POWER" key before the time has been reached, the set time will be
cancelled and the unit will turn off.
8. SLEEP CONTROL FUNCTION
1. Sleep comfort mode under cooling setting - the temperature will be increased by 1ºC after 1
hour. Subsequently, the temperature will be increased by 2ºC after 2 hours. It will maintain this
setting without further changes.
2. Under dehumidification mode, no sleep mode can be chosen.
3. Low fan speed setting is default under sleep comfort mode, but can be adjusted
4. Sleep comfort mode under heating setting, the temperature will be decreased by 1ºC after 1
hour. Subsequently, the temperature will be decreased by 2ºC after 2 hours. It will maintain
this setting without further changes.
9.”E7” ERROR DISPLAY
When the unit warns of ‘full water’, please unplug the water stopper at the back
of the unit and tilt the unit backwards to drain the water out. Then the unit can be
restarted. If the E7 message appears again, your unit will need to be repaired.
Please contact Customer service for servicing.
Note: Heating function does not operate if the ambient temperature is over 23ºC.
The unit can defrost automatically and display “DF” if the ambient temperature is
above 20ºC.
REMOTE CONTROL FUNCTIONS
The remote control uses two
1.5 VOLTS UM4 AAA CR03
type batteries
- Do not mix old and new batteries
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh,
etc) batteries
Stop/Start switch
“MODE” selector
Hourly programming
Automatic fan speed
High fan speed
Medium fan speed
Low fan speed
Sleep comfort mode selector
Temperature selector
7
8
