Ubee Interactive
Using the Port Filtering Option
Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012
45
Steps
To set up IP filtering.
1. Make sure a PC is connected to the cable modem and both devices are powered on
and functioning.
2. Go to
Tools
>
Client
List
in the Web user interface. Refer to
Accessing the Web
Interface on page 17
. Your PC and other devices are listed.
3. Note the MAC address and IP address of the devices to which you want to deny
Internet access. For more information, refer to
Using the Client List Option on page 83
.
4. Click
Gateway
from the main menu.
5. Click
IP Filtering
from the left side menu.
6. Enter the MAC address and IP address of devices to which you want to deny Internet
access.
7. Click
Apply
. Field descriptions are listed below the screen example.
5.10
Using the Port Filtering Option
Port Filtering
allows you to configure port filters to block to all devices on the LAN
Internet services that use specific ports.
Label Description
Start Address
Defines the starting IP address to filter.
End Address
Defines the ending IP address to filter.
Enabled
Activates the rule when enabled is checked.
Apply
Saves all screen changes when clicked.
