ubbink Ubiflux W180, Руководство по установке

Страница: 113 / 164

Ubiflux W180 / W180+ 29
Electric connections accessories Chapter 11
11.2 Connection examples multiple switch
Wire colours C1 - C6 may vary dependent on
the type of modular cable used.
Note: For the modular cable used, the “tab” of both modular
connectors must be mounted facing the mark on the
modular cable.
A = Ubiflux W180
B = Receiver for wireless remote control
C = Transmitter with 4 settings
(for instance the kitchen)
D = Transmitter with 2 settings
(for instance the bathroom)
E = Any additional 2- or 4-settings
transmitters (A maximum
of 6 transmitters can be signed
on to 1 receiver)
A = Ubiflux W180
B1 = Multiple switch with filter indication
B2 = Additional multiple switch with filter indication
C = Splitter
A = Ubiflux W180
B = Multiple switch with filter indication
C = Receiver for wireless remote control
D = Transmitter with 2 settings
E = Splitter
A multiple switch can be connected to the modular connector X180 of the Ubiflux.
This modular connector is directly accessible from the top of the appliance (see §11.1) .
11.2.1 Multiple switch with filter indication
A = Ubiflux W180
B = Multiple switch with filter indication
11.2.2 Wireless remote control (without filter indication)
11.2.3 Additional multiple switch with filter indication 11.2.4 Additional multiple switch wireless remote control
230 V
50 Hz
B
A
B
RJ12/6 RJ12/6
A
B
230 V
50 Hz
C
E
D
A
230 V
50 Hz
B2
B1
C
A
230 V
50 Hz
E
B
C
D