ubbink Ubiflux W180, Руководство по установке

Страница: 100 / 164

16 Ubiflux W180 / W180+
Message text
on display
Description
FILTER When the text “FILTER” appears
on the display, the filter must be
cleaned or replaced; for detailed
information on this subject see
§ 9.1
Slave 1, Slave
2 etc.
For coupled appliances the mes-
sage text shows which appliance is
“Slave 1” - “Slave 9”; for detailed in-
formation on this subject see §11.3.
The “Master” appliance displays
the regular layout regarding venti-
lation mode.
EWT
(Only for + ver-
sion)
When the text “EWT” appears
on the display, the geo-heat ex-
changer is active.
For detailed information, also refer
to §11.8.
CN1 or CN2
(Only for + ver-
sion)
When the text “CN1 or CN2” ap-
pears on the display, one of the ex-
ternal switch inputs is active, also
see §11.6.
V1 or V2
(Only for + ver-
sion)
When the text “CN1 or CN2” ap-
pears on the display, one of the
external 0 - 10 V inputs is active,
also see§11.7.
This part of the display may show a message text. The
message text “Filter” always takes precedence over the
other message texts.
The following message texts may appear during operating
mode.
Chapter 6 Display layout
Slave - appliance
Master - appliance
6.2.3 Message text for operating mode