UAZ CARGO, Руководство по эксплуатации, Страница: 181 / 208

181
Headlight replacement. To change T/signal lamps remove the
connector from socket 6 (Fig. 9.33), turn the socket clockwise (for
the right headlight) or counter-clockwise (for the left headlignt)
and remove the socket with the bulb.
To change the bulbs of high 3 and low 4 beams, remove cap 5.
Disconnect the wire from lamps 3 and 4, release the ends of the
lamp spring pawl from slots and remove the lamp.
Install halogen lamps wearing gloves, do not touch the lamp
bulb. If the bulb has fat stains, remove them with alcohol.
Front fog lamps.
Adjust the front fog lights with screw 1
(Fig. 9.34), using S=5 or Torx T20 keys. Install the light into the
position in which the cutoff line coincides with line 1 (Fig. 9.35).
To replace front fog lights remove wiring harness connector 2
(Fig. 9.42) from the light, turn it counter-clockwise and remove it.
Fig. 9.33. Headlamp:
1 — adjusting screw; 2 — adjusting gear with inner hexagon; 3 — high beam lamp;
4 — low beam lamp; 5 — cap; 6 — T/signal lamp socket.