UAV-1004270-001
43
Rev A
Appendix B Equipment Compatibility and
Interconnect Drawings
tailBeaconX can be controlled by uAvionix devices such as the AV-20-E,
AV-30-E and AV-30-C. The AV-30 series is a 3-inch feature-rich primary
display, and the AV-20 series is a 2-inch multi-function display. Learn more
about each of these products and download the installation and operation
manuals at
. Additionally, tailBeaconX can be controlled
by a variety of third-party EFIS displays.
The installation information below serves as a supplement to the uAvionix
AV series and third-party EFIS manuals, and concern basic configuration
and wiring of the transponder control functionality only. For further
installation and operating instructions, please reference the appropriate
installation manual and pilot’s guide. The installer should become fully
familiar with the installation process for the controlling device. Use of these
devices may be limited to non-certified aircraft. These descriptions are
informational, and in no way grant an installation approval.
B.1 Compatible Protocols
tailBeaconX is compatible with the UCP-HD and Apollo protocols, as
documented in Appendix A.
B.2 Compatible Equipment
The following equipment has been shown to be compatible with
tailBeaconX, and can serve as a controlling device.
Manufacturer
Model
tailBeaconX
Protocol [1]
Controller Configuration
uAvionix
Enable “XPDR CTRL” page
SERIAL 2: “BEACON X”
GPS NAV SRC: “BEACON X” (optional, enable if
GPS track and velocity information desired)
[1]
tailBeaconX input/output protocol automatically selected, for information purposes only
See below for example interconnect drawings.