UAV-1004270-001
38
Rev A
10 Normal Operation
tailBeaconX must be enabled, typically in ALT mode, during all phases of
flight including surface movement operations.
11 Maintenance
The tailBeaconX is not a user serviceable product. All service must be
performed either by uAvionix or an authorized uAvionix repair center.
12 Care and Cautions
The tailBeaconX should be regularly cleaned with warm soapy water and a
soft cloth micro-fiber rag to remove accumulated contaminants. Use of
chemical cleaners and degreasers should be avoided. If the tailBeaconX is
exposed to cleaning chemicals, you should promptly wash off all residue.
DO NOT wax, buff, paint or attempt to polish any part of the tailBeaconX
assembly. Doing so may damage the lens or electronics. Avoid any contact
with abrasive materials including scrubbing pads.
Never hit, tap on or flex the fin portions the tailBeaconX assembly. Doing
so will cause undue stress and could void your warranty.
13 Support
For additional questions or support please visit:
https://www.uavionix.com/support/