UAV-1002156-001
ECCN 7A994
Page
28 | 37
REV I
0 to 60 Meters in 2 Meter increments
8.4 Update and Confirm Configuration
1. After entering the correct information for all fields press Apply. You
should receive a message confirming the configuration at the top of
the screen.
2. Programming of the SkyEcho is complete. You can disconnect your
computer or mobile device from the Wi-Fi hotspot.
9 Normal Operation
9.1 Battery Pack / Charging
The integrated battery pack needs to be fully charged before use.
Connect the USB-C cable to the connector on the bottom of the SkyEcho in
order to charge the battery. The BLUE LED will remain lit during charging,
and will extinguish when the battery is fully charged.
9.2 Power On/Off
Press and hold the momentary power switch for approximately 3 seconds
to power the SkyEcho on.
Press and hold the momentary power switch for approximately 3 seconds
to power the SkyEcho off.
9.3 Indicators
There are a 3 LEDs visible through the top cover of SkyEcho.
LED
Color
On
BAT
Blue
Battery Charging
BAT
Red
Battery Low (<33%)
BAT
Yellow
Battery 33%-66%
BAT
Green
Battery > 66%
ADS-B
Off
ADS-B receive only
ADS-B
Green (blinking)
ADS-B transmit/receive
GPS
Red
No GPS Lock
