UAV-1002156-001
ECCN 7A994
Page
19 | 37
REV I
8.3.1 Connecting to the SkyEcho2 via Wi-Fi
1. To connect to the SkyEcho, power on SkyEcho and join a device to the
wireless network SSID named SKYECHO-XXXX using the procedure for
your device. This procedure is identical to joining any other public or
private Wi-Fi on your chosen device.
2. If required, enter
uavionix
as the WPA password for the secure Wi-Fi
network, then tap join. Note:
The No Internet Connection
message is
normal when connected to SkyEcho.
3. Open any browser on your computer/mobile device that is connected to
your SkyEcho via the Wi-Fi link and type in 192.168.4.1
The following landing page should load, depicting the SkyEcho status.
Note the version numbers and SSID may differ from the illustration.
Click on
“SkyEcho Setup” to
configure SkyEcho with your
aircraft information.
33
