UAV-1004178-001 Rev A
ECCN 7A994
Page
12 | 28
Conditions
160G
Description of Conducted Tests
Power Input
16.0
Equipment identified as Category BX
Voltage Spike
17.0
Equipment identified as Category B
AF Conducted Susceptibility
18.0
Equipment identified as Category B
Induced Signal Susceptibility
19.0
Equipment identified as Category AC
RF Susceptibility
20.0
Equipment identified as Category TT
RF Emissions
21.0
Equipment identified as Category B
Lightening Induced Transient
Susceptibility
22.0
Equipment identified as Category A2G2L2
Lightening Direct Effects
23.0
Equipment identified as Category X – no test
Icing
24.0
Equipment identified as Category X – no test
Electrostatic Discharge
25.0
Equipment identified as Category A
Fire, Flammability
26.0
Equipment identified as Category X – no test
5.9 Continued Airworthiness
Maintenance of the ping200XR is "on condition" only. For regulatory
periodic functional checks, refer to the approved aircraft maintenance
manuals or manual supplements. The aircraft must be returned to service
in a means acceptable to the appropriate aviation authority.
5.10 System Limitations
This article meets the minimum performance and quality control standards
required by a TSO. If you are installing this article on or in a specific type or
class of aircraft, you must obtain separate approval for installation.
