UAV-1004178-001 Rev A
ECCN 7A994
Page
26 | 28
8.8 ADS-B In Capability
The ADS-B transmissions include an indication to the ground stations of
whether the aircraft includes a 1090MHz ADS-B receiver, a UAT ADS-B
receiver, or both. This data is used to transmit ADS-R or TIS-B broadcasts
to your aircraft if conditions indicate. ping200XR does not include an ADS-
B receiver. Only select these items if you have a separate ADS-B receiver
on-board.
8.9 Baro Altitude Source
If the external control input provides the barometric altitude, set the Baro
Altitude Source to external. The ping200XR will use the Baro Altitude
reported in the Control Message.
8.10 Serial Port Baud Rate
This setting configures the speed of the control interface serial baud rate in
bps.
8.11 SIL / SDA
Set according to the system and design integrity of the GPS source.
8.12 Default Control Mode
Select the desired control type. This setting configures the ping200XR for
Mode A, Mode C, Mode S and ADS-B Extended Squitter transmissions.
•
None selected disables all modes.
•
Mode A - Squawk
•
Mode C – Altitude
•
Mode S – Addressed Identification and Altitude
•
Mode ES – ADS-B Identification and Position reporting
8.13 Default Squawk
The default squawk is 1200. To assist ATC tracking of aircraft, an aircraft
category can be transmitted.
