UAV-1004178-001 Rev A
ECCN 7A994
Page
19 | 28
7.4 Connections
Whenever power is supplied to the transponder, a 50 Ohm load
must be provided to the SMA connection. You can use the
supplied antenna or a commercially available 50 Ohm load.
Powering the transponder without an attached load will result in
damage to the device not covered under warranty.
7.5 Wiring Diagram
Ping200XR
CONTROL and
CONFIGURATION
POWER (9-30.3V)
ANTENNA
Control Input
(Control Head or
Autopilot)
GPS
ANTENNA
Control Interface
Pin
Type
Physical
Rate
Black
Ground
Red
Aircraft
Power
9-30.3V
Grey
COM TX
RS-232 Out
Programmable
Orange
COM RX
RS-232 In
Programmable
!
ping200XR