UAV-1004234-001, AV-30-E, Installation Manual
37
Rev C
11.2 Transponder (tailBeaconX)
For complete installation guidance, see tailBeaconX TSO
Installation Manual, UAV-1004270-001.
For operation of tailBeaconX using the AV-30, see P
ilot’s Guide,
UAV-1004233-001.
tailBeaconX is a complete Mode S Extended Squitter (ES) ADS-B OUT
transponder, integrated with an internal SBAS/WAAS GPS and all necessary
antennas into an LED rear position light. tailBeaconX is designed to meet the
transponder and ADS-B requirements for operating in controlled airspace
worldwide, while minimizing installation costs.
11.2.1
Transponder Control
See AV-30-E
Pilot’s Guide UAV-1004233-001 for transponder control
interface configuration.
11.2.2
Transponder Testing with tailBeaconX
•
Set AV-30 in STBY mode by following the above procedures.
•
Go to the tailBeaconX and connect to Wi-Fi and connect to the
tailBeacon application.
•
When it is connected go to the bottom of the page and click “GND
TEST MODE”.
•
Set the AV-30 to ALT mode.
•
tailBeaconX will now respond to all calls on transponder test sets.
•
When test is complete cycle power.
