5
revised 09/09
Smog-Hog
SG Series Model
Built-in magnetic starters, overload relays and fuses
are supplied on all blower units with in-place cleaning
and those with special agency labels. remote on/
off switches with interlocks are provided on all blower
units with in-place cleaning (see figure 8). Power
connection to the unit should be completed per wiring
diagram inside the field wiring box. For units with in
place cleaning systems, refer to in-Place cleaning
owner’s Manual.
installation should comply with all state and local codes.
if no codes apply, installation should comply to national
electrical code. refer to Section 12.2 for wiring
diagrams).
Figure 5
Drain and Trap Installation
!
CAUTION
When electrical control panels are supplied by
others, an electrical interlock should be provided
for the SG power pack circuit and the unit exhaust
blower. This provides safe operation of the
Smog-Hog® SG. Do not operate the power pack
circuit with the system exhaust blower off line.
Figure 6
Units Without Blowers
