1
TECHNICAL DATA
Applications…………………….
Subflooring, Sheathing, Crating, Furniture Frames, Wall
Sheathing
Features………………………... Heavy Duty Stapler, Top Loading Magazine
Dimensions (H×L×W)………….
Weight…………………………..
Air Inlet……………………….…
□
NPT 1/4” ……………………….
□
PT 1/4”
Maximum Permissible Operating Pressure………………………… 120 PSI (8 BAR)
Recommended Operating Pressure………………………………… 70 – 100 PSI (5 – 7 BAR)
NOISE CHARACTERISTIC VALUES IN ACCORDANCE WITH ENxx1:
A-weighted single-event sound pressure level at operator’s position: L
PA, ls
＝
94dBA
A-weighted single sound pressure level:L
pA,ls,lm
＝
89dBA
Caution! AT THE WORKPLACE, ALWAYS WEAR HEARING PROTECTION EQUIPMENT
VIBRATION CHARACTERISTIC VALUES IN ACCORDANCE WITH ISO 8662, PART II
：
Weighted root mean square acceleration
＝
3.2m/s2
2
SAFETY INSTRUCTIONS
●
READ ALL INSTRUCTIONS.
Do not attempt to operate
the tool until you read and understand all safety
precautions and manual instructions.
●
●
Never use oxygen or combustible gas as a power source
for the tool.
EXPLOSION MAY OCCUR.
Use dry, filtered, lubricated and regulated compressed air
only.
●
Never use gasoline or other flammable liquids to clean the
tool. Vapors in the tool will ignite by a spark and cause the
tool to explode.
●
Do not exceed maximum permissible operating pressure
120 PSI (8 BAR).
●
Disconnect the tool from air supply when: loading and
unloading, clearing jams, performing service or
maintenance and non-operation.
ALWAYS ASSUME THE TOOL IS LOADED!
