FIGURE 2
14
15
16
9
12
8
13
11
17
7
18
19
20
21
23
22
22
10
RECOVERY TANK: (REFER TO FIGURE 2)
Pre-Filter:
800 micron polyester mesh bag with quick-change cord lock. This
fi
lter hangs inside the tank from the recovery hose inlet
piping. Check the pre-
fi
lter before operation and clean as required.
Stainless Steel Filter:
50-mesh
fi
lter screws into base of recovery tank. Inspect daily and clean as needed.
Float Valve:
Located on the back wall in recovery tank, it automatically controls dump pump when switch is in ON position. Before
each use, inspect the
fl
oat to ensure it is in the proper
position and clear of debris that would interfere with free operation.
23 Recovery Tank Dump Hose:
Located on the rear of the recovery tank. Use this hose to manually drain the remaining recovered solution
from the tank and during tank cleaning.
revised 1/12
1/12
A - 5
56041839 - TORRENT
ENGLISH - A
INSTRUCTIONS FOR USE
