Page 3
SKU 47558
7.
Use eye and ear protection
. Always wear ANSI approved impact safety goggles.
Wear an ANSI approved dust mask or respirator when working around metal, wood,
and chemical dusts and mists.
8.
Do not overreach
. Keep proper footing and balance at all times. Do not reach over or
across running machines.
9.
Maintain tools with care
. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories. Inspect
tool cords periodically and, if damaged, have them repaired by an authorized
technician. The handles must be kept clean, dry, and free from oil and grease at all
times.
10.
Disconnect power
. Unplug tool when not in use.
11.
Remove adjusting keys and wrenches
. Check that keys and adjusting wrenches
are removed from the tool or machine work surface before plugging it in.
12.
Avoid unintentional starting
. Be sure the switch is in the Off position when not in
use and before plugging in.
13.
Stay alert
. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
14.
Check for damaged parts
. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified
technician. Do not use the tool if any switch does not turn On and Off properly.
15.
Guard against electric shock
. Prevent body contact with grounded surfaces such
as pipes, radiators, ranges, and refrigerator enclosures.
16.
Replacement parts and accessories
. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor
Freight Tools.
17.
Do not operate tool if under the influence of alcohol or drugs
. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
18.
Use proper size and type extension cord
. If an extension cord is required, it must
be of the proper size and type to supply the correct current to the tool without heating
up. Otherwise, the extension cord could melt and catch fire, or cause electrical
damage to the tool. This tool requires use of an extension cord of
0 to 10 amps
capability (up to 50 feet), with wire size rated at
18 AWG
. Longer extension cords
require larger size wire. If you are using the tool outdoors, use an extension cord rated
for outdoor use. (signified by “WA” on the jacket).
Содержание 47558
Страница 10: ...Page 10 SKU 47558 Assembly Drawing...
