U-Line H-8184, Руководство пользователя

Страница: 12 / 39

PAGE 12 OF 39 0920 IH-8184
ERROR CODES CONTINUED
ERROR CODE DESCRIPTION CAUSES RECOMMENDATIONS
E29 Channel 1 is not same type
as when initialized.
Change in Desk Leg type.
Loose wire inside motor.
Check desk leg type.
Change desk leg.
Initialize the system.
E30 Channel 2 is not same type
as when initialized or not
same type as channel 1.
Change in desk leg type.
Loose wire inside motor.
Check desk leg type.
Change desk leg.
Initialize the system.
E35 Channel 1 had to many
pulse errors.
Loose/faulty cable.
Hall sensor PCB.
Check motor cable
connections and integrity.
Change desk leg.
Initialize the system.
E36 Channel 2 had to many
pulse errors.
Loose/faulty cable.
Hall sensor PCB.
Check motor cable
connections and integrity.
Change desk leg.
Initialize the system.
E41 Overload up occurred on
channel 1.
Leg is overloaded.
Hit obstruction.
Reached end stop (before
initialization at upper
endstop occurs).
Remove obstruction.
Remove load.
Initialize if necessary.
E42 Overload up occurred on
channel 2.
Leg is overloaded.
Hit obstruction.
Reached end stop (before
initialization at upper
endstop occurs).
Remove obstruction.
Remove load.
Initialize if necessary.
E47 Overload down occurred on
channel 1.
Hit obstruction. Remove obstruction.
Initialize if necessary.
E48 Overload down occurred on
channel 2.
Hit obstruction. Remove obstruction.
Initialize if necessary.
E53 Anti-collision triggered on
channel 1.
Hit obstruction. Remove obstruction.
Initialize if necessary.