U-Line H-3778, Руководство пользователя

Страница: 5 / 10

0513 IH-3778 PAGE 5 OF 10
INSTALLATION IN A SLIDING SASH
WINDOW
1. Cut the foam seals (adhesive type) to the proper
lengths and attach them to the window frame.
(See Figure 16)
2. Open the window sash and place the window slider
kit on the window stool. (See Figure 17) Attached
the window slider kit to the window stool. Adjust the
length of the window slider kit according to the
height of the window. Screw down the two screws
on the window slider kit. (See Figure 17) Cut the
adjustable window slider kit if the height of the
window is less than 26.6 inches. (See Figure 18)
3. Close the sliding sash securely against the window
slider kit. (See Figure 19)
4. Drive two ½" screws to secure the window slider kit to
the window sash. (See Figure 19)
5. Drive two ¾" screws to secure the window slider kit to
the window sash. (See Figure 19)
6. Cut the foam seal to an appropriate length and seal
the open gap between the sliding sash and outer
window sash. (See Figure 20)
7. To secure the sliding sash in place, attach right
angle sash lock with ½" (12.7mm) screw.
(See Figure 21)
INSTALLATION INSTRUCTIONS CONTINUED
Foam seal
(adhesive type)
screws
26.6"~48.5"
Window stool
Window slider kit
Window stool Window slider kit
screws
screws
Figure 17
Figure 18
Figure 16
screws
26.6"~48.5"
Window stool
Window slider kit
Foam seal
Figure 19
Figure 20
Figure 21