U-Line H-1679, Руководство пользователя

Страница: 12 / 62

12 of 62 0319 IH-1679
ACCUMULATION
NOTE: Before using Accumulation
function, remove all weight from
forks and zero the scale.
1. Weigh item on scale. Once "stable"
indicator shows, press M+ key to store
weight in memory.
2. The display will show "AC 01" and then the
total in memory for 2 seconds before
returning to normal.
3. The M+ indicator is on. Remove the
weight, allow the scale to return to zero,
and put a second weight on the scale.
4. Press M+ key, the display shows "AC 02"
and then the new total.
5. Continue until all weights have been
added. The scale can accumulate up to
99 items.
NOTE: Changing weighing units
during Accumulation Function will
clear memory.
MEMORY RECALL
To view the totals in memory, press the M+
key while display reads zero, and display will
show "AC n" ('n' is current accumulation
times) and then the total in memory for 2
seconds. The scale then returns to normal.
TO CLEAR MEMORY
To clear the accumulated data in memory,
press G/N key when total weight value is
displayed.
PRETARE
1. To set press and hold PT key for 3
seconds to display current tare value.
2. Display now shows "Pts 0". Press TARE
key to select desired pretare item.
(0-9 preset items are available)
3. After Pretare value has been entered,
press ZERO key.
4. To manually key in a tare value, use TARE
key to select value and M+/ PT keys to
toggle between active digits.
5. Once pretare item is selected, press ZERO
key to store pretare value in memory.
NOTE: Pretare value is displayed while
NET indicator is shown on display.
6. Press U key to go back to normal
weighing mode.
SELECT PRETARE
1. Press G/N key to ensure scale is in net
mode.
2. Press PT key. "Ptl 0" is shown on display.
Press TARE key to select desired stored
item (0-9). Press ZERO key to display
pretare value.
CLEAR PRETARE VALUE
1. Press PT. Display will show "Ptl 0".
2. Use TARE key to select desired pretare
item (0-9).
3. Press ZERO key to display pretare weight.
4. Press and hold PT for 3 seconds and
follow steps in section I to set pretare
value to zero.
5. Press U key to go back to normal
weighing mode.
PARAMETERS
The scale has parameters that can be set by
the user.
1. To set parameters, press the ZERO key and
TARE key at the same time.
2. The display will show the first function, "F1
unit".
3. Pressing the TARE key will cycle through the
other functions.
4. Pressing ZERO key will allow you to set the
function.
5. It may be necessary to either use TARE key
set a value or using the M+ and PT key to
move the active digit and then using the
TARE key to increment a digit, followed by
the ZERO key to enter the value.
6. Use the "U" key to leave a parameter
unchanged.
7. For example when the display shows "F1
unit" press the ZERO key to begin.
The display will show "ON lb". Press the TARE key
to set the weighing unit to ON/OFF status.
1. Press ZERO key to enter value, and the
scale will show the next weighing unit.
Use TARE key to set and ZERO key to
enter. When finished press U key to exit.
OPERATION CONTINUED