PAGE 5 OF 13
0922 IH-10066
SETUP
USER INTERFACE
1. Battery Charge Status
display. (See Figure 1)
2. Mode Indicators:
MAN, SEMI and AUTO
3. MODE button:
a. One click: select mode
of operation
b. Hold button approximately one second to
activate or deactivate optional laser
TOOL STATUS INDICATOR
DURING STARTUP
•
Blue LED pulsating twice
indicates that battery has
been inserted and trigger
has been actuated once.
Tool turns on. (See Figure 2)
DURING OPERATION
•
Blue LED slowly pulsating
indicates unit is ready
for operation.
•
Green LED on
indicates tool
is in stapling position. Box detection is activated
and finger is on trigger (trigger sensor).
• Red LED slowly pulsating or on
indicates a
tool error.
BATTERY AND CHARGER
NOTE: For detailed information, refer to the
operating instructions for battery and charger
on page 6.
FUNCTION
The stapling tool is positioned on carton to be closed
(box detection sensors activated). (See Figure 3)
• Actuating the trigger starts the stapling process.
• During downward movement of driver blade (1),
a staple (2) is sheared off the staple strip.
• The staple is pushed into the carton by the driver
blade and bent (4) using the clinchers (3).
• The clinchers and driver blade are released from the
carton in an upward movement and brought into
the initial position.
1
3
2
4
Figure 3
NOTE: Three operating modes are available:
Manual, Semi-automatic and Automatic
STAPLE TYPES
• Staple length 5/8" for total carton thickness
0.20-0.35" (S-10720).
• Staple length 3/4" for total carton thickness
0.28-0.47" (S-10721).
NOTE: Stapler comes pre-set at 5/8"
staple length.
NOTE: The staple leg length can be set.
NOTE: The staple penetration depth can be set.
NOTE: The staple clinch can be set.
Tool Status
Indicator
Figure 2
MAN
MODE
SEMI
AUTO
1
2
3
Figure 1
PARTS
#
DESCRIPTION
1
Battery
2
Charger
3
Battery Release
4
LED Indicator
1
3
4
2