PAGE 13 OF 13
0922 IH-10066
TROUBLESHOOTING CONTINUED
If the troubleshooting section does not resolve your problem, contact Uline Customer Service at 1-800-295-5510.
OPERATING ISSUE
CAUSES
RECOMMENDATIONS
Several staples are set
at once.
Magazine not mounted correctly.
Re-install magazine; see page 10.
Staple penetrates
only through upper
corrugate.
Wrong penetration setting (too low).
Staples too short.
Carton too thick.
Adjust penetration depth; see page 9.
Replace with longer staples.
Use other carton thickness.
Loose staple clinch.
Clinch setting too loose.
Adjust staple clinch (tighten); see page 9.
TECHNICAL DATA
STAPLER
SPECIFICATION
Operation modes
Manual/Semi-Automatic/Automatic
Weight (including battery)
6 lbs.
Dimensions (L x W x H)
16.1 x 4.3 x 8.1"
Staple cycle speed
200 ms
Magazine capacity
150 pcs.
Typical measured A-rated emission sound pressure level
– EN 60745-1/2:2009 Average sound power level
– EN 60745-1/2:2009 Deviation K
L
PA
77 dB (A)
L
WA
85 dB (A)
K
WA
2.5 dB
Vibrations on handle – EN 60745-1/2:2009
a
h
< 2.5 m/s
2
Operating temperature (See also operating instructions for
battery and charger on page 7)
14-104°F
Maximum allowable relative humidity
Up to 90%
STAPLES
SPECIFICATION
Length
5/8-3/4" (JK561-15/18) / 7/8" (JK561-22)
Width
1⁄"
BATTERY/CHARGER
SPECIFICATION
Charger type
US: Bosch BC330 (Bosch GAL 1230 CV)
Rated voltage charger
US: 115 V (230 V)
Battery
Bosch Li-Ion 12 V, 4.0 Ah
Charging time (80-100%)
US: Approx. 120-160 min. (Approx. 60-80 min.)
Shots per battery charge
Up to 6,000
1-800-295-5510
uline.com
