CLR2160, CLRCO2175
19
5. Remove the two door closer inserts
(Figure 37)
from
the existing bottom hinge and install as shown on the
new bottom hinge
(Figure 36)
.
6. Remove existing bottom hinge (three screws) and
remount on opposite side TOP. Remove hinge screw pin.
7. Remove the plastic hole plug from the top of the door
to allow the pivot pin to be inserted in the new
location. Install the plug into the vacated hole on the
opposite side.
Figure 38
8. With bottom of door facing up, remove pivot plate
(two screws), flip over, and remount on opposite side of
door
(Figure 38)
.
Be sure notch in plate faces
center.
9. Holding door upright with top of door tilted forward,
place hole of door pivot plate on bottom hinge screw
pin/closer inserts
(Figure 36)
.
10. Tilt top of door into position in top hinge and install top
hinge screw pin.
11. Install metal hinge plugs removed in Step 2 in old hinge
holes (three each, top and bottom).
Door Shelf Removal/Insertion
Figure 39
To remove the door shelf:
1. Grasp shelf in center, lift slightly, and tilt 15°-20°.
2. Carefully pull shelf off bosses
(Figure 39)
.
To install the door shelf:
1. Holding shelf in center, align notches in shelf with
bosses in door
(Figure 39)
.
2. Tilt shelf at a 15°-20° angle and slide onto bosses at the
desired location.
Glass Shelf Removal/Installation
Figure 40
1. Pull shelf out about 6"
(Figure 40)
until back of shelf
clears the "hump" on the right-hand side.
2. Tilt right-hand edge of shelf up. Remove shelf from unit
by pulling out
(Figure 40)
.
Insert the shelves as follows:
1. To move to a different position in the unit, insert shelf
at an angle, approximately 15°-20°, over the rib in the
side of the unit where you want to place the shelf. The
shelf must be started into the unit at an angle to clear
the door.
2. Continue to slide the shelf into the unit at an angle
until it clears the door.
3. Lower the shelf and push it in completely.
Light Bulb Replacement - Model
CLRCO2175 Only
To replace the light bulb in your U-Line unit:
Figure 41
ULIN_0006_A
Notch
Boss
ULIN_0039_A
ULIN_0276_A
1
2
Lens
Tab
ULIN_0001_A
