12
CLR2160, CLRCO2175
5. Reconnect power to the unit and allow it to run for one
hour (minimum) until any remaining ice has been
ejected from the ice maker assembly.
6. Disconnect power to the unit, dry any remaining water
from the ice maker assembly, and reconnect any lines
removed from the water supply valve.
7. Disconnect the power cord from its outlet and leave it
disconnected until the unit is returned to service.
8. Clean and dry the interior of the cabinet.
9. During period of non-use, the cabinet must remain
open to prevent the formation of mold and mildew.
Open door a minimum of 2” (5 cm) to provide the
necessary ventilation.
If the unit is being removed from service for disposal,
check and obey all Federal, State and/or local regulations
regarding the disposal and recycling of refrigeration
appliances, and follow these steps completely:
1. Disconnect power to the unit and unplug the power
cord from its outlet.
2. Shut off water supply to the unit at the main water
source and disconnect the supply line to the unit’s water
valve.
3. Remove the cabinet door if equipped and secure all
interior shelves to the interior of the cabinet using a
heavy duty cloth or package sealing tape.
DANGER
RISK OF CHILD ENTRAPMENT. Before you throw away
your old refrigerator or freezer, take off the doors
and leave shelves in place so that children may not
easily climb inside.
Proper maintenance of your U-Line unit will ensure
efficiency, top performance and long life. The
maintenance intervals listed are based on normal
conditions. You may want to shorten the intervals if you
have pets or other special considerations.
Exterior Cleaning (As Required)
BLACK AND WHITE MODELS
• Surfaces may be cleaned with a mild detergent and
warm water solution. Do not use solvent-based or
abrasive cleaners. Use a soft sponge and rinse with
clean water. Wipe with a soft, clean towel to prevent
water spotting.
STAINLESS STEEL MODELS
• Stainless steel surfaces and components can discolor
when exposed to chlorine gas, pool chemicals, salt
water or cleaners with bleach.
• Keep your stainless steel unit looking new by cleaning
with a good quality all-in-one stainless steel cleaner/
polish on a monthly basis. For best results use Claire
®
Stainless Steel Polish and Cleaner, which can be
purchased from U-Line Corporation, part number
713348.
• Do not clean with steel wool pads.
• Do not use cleaners that are not specifically
intended for stainless steel on stainless steel
surfaces (this includes glass, tile and counter
cleaners).
• If any surface discoloring or rusting appears, clean it
quickly with Bon-Ami
®
or Barkeepers Friend Cleanser
®
and a non-abrasive cloth. Always clean in the direction
of the grain. Always finish this process with Claire
®
Stainless Steel Polish and Cleaner or comparable
product to prevent further problems.
• Using abrasive pads such as Scotchbrite
™
cause
the graining in the stainless steel to become
blurred.
• Rust that is not cleaned up promptly can penetrate into
the surface of the stainless steel and complete removal
of the rust may not be possible.
Defrosting
Automatic (Cycle) Defrost and Frost-Free Models
These models do not produce frost in normal operating
conditions. However, a frost pattern may be noticed on
the interior walls if the unit is repeatedly opened in a high
heat or high humidity location. If this frost pattern does
not clear within 24 hours, your unit will require manual
defrosting.
12
PRODUCT DISPOSAL
13
MAINTENANCE & CLEANING
