QUICK START GUIDE
12
USER GUIDE
u-line.com
General Installation
CO
2
Connection
NOTE: Regulator and CO2 tank not included
1. Attach regulator to CO2 tank. Hand tighten the coupling nut and then use an adjustable wrench for an additional quarter
turn. DO NOT OVER TIGHTEN
3. Attach and clamp CO2 tubing to tap couplers.
2. Attach 5/16” CO2 tubing to regulator nipple and clamp into place. If necessary, make the tubing more pliable by heating
the end in boiling water.