QUICK START GUIDE
8
USER GUIDE
u-line.com
General Installation
General Installation
U-Line Double Tap Kits are designed to work with the U-Line keg refrigerator model CDE215D. Tap kits can be installed
directly on top of the keg refrigerator in a free-standing application or through a countertop in a built-in application.
MAXIMUM CAPACITY
(tanks and kegs not included)
•
UP to three 1/6 slim kegs - 2 connected, 1 stored and one 5-pound/22 cubic feet CO2 tank.
•
Up to two 1/4 slim kegs and one 5-pound/22 cubic feet CO2 tank.
•
One 1/2 barrel and one 5-pound/22 cubic feet CO2 tank.
CAUTION
!
Safety and Warning
WARNING
!
CO2 can be dangerous. Handle with care.
Never exceed 60 PSI.
Most draft beers are dispensed between 8-14
PSI and most stouts are dispensed at 30-14 PSI.
Pressures above 50 PSI will release the built-in
pressure relief.
Always connect CO2 tank to regulator. Never
connect the tank directly to a keg.
Ventilate area after CO2 leak:
If it becomes difficult to breathe and your head
starts to ache, high levels of CO2 may be pres-
ent. LEAVE THE ROOM IMMEDIATELY.
Safety and Warning
Keep CO2 tank in an upright position. The regulator
may break if the tank falls.
Secure the CO2 tank
.
1/6 Slim Barrel
Sixth Slim
5 Gallons
53 - 12 oz. cups
9.25” x 23.5”
Kit includes:
1. Tower (includes faucets, handles, gasket, wrench, hardware, & clamps)
2. Drip tray
1
2