U-Line 3024DWR, Руководство пользователя и сервисное руководство

Страница: 58 / 68

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Control Operation - Service 4
USER GUIDE
u-line.com
6. Press to scroll through each relay and DC output.
7. Press to toggle.
To exit the Relay Toggle menu press to select
“Return to Menu” and press to confirm.
Input Status
Input status displays the current state of each
available input.
ID Description State
Left Door Left (top) Door Switch Open - Closed
Right Door Right (bottom) Door
Switch
(excludes ZWC)
Open - Closed
To access Input Status
1. Press to select “Input
Status”.
2. Press
3. Press to scroll through available information.
To exit the Input Status menu press to select
“Return to Menu” and press to confirm outputs.
Outputs
Outputs is used to monitor the state of DC outputs.
ID Description Value
L Evap Fan Left (top)
Evaporator Fan
(excludes ZWC)
On - Off
R Evap Fan Right (bottom)
Evaporator Fan
(excludes ZWC)
On - Off
Condenser Fan Condenser Fan On - Off
L Light Left (top) Light Off - Low - Med -
High
R Light Right (bottom)
Light Off - Low - Med -
High
To access Outputs
1. Press to select “Outputs”.
2. Press
3. Press to scroll through
available information.
To exit the Input Status menu, press to select
“Return to Menu” and press to confirm.
Offsets
NOTICE
Do not make an adjustment to this without first
contacting the tech line: (800) 779-2955.
Offsets are used to adjust or correct thermistor
readings. Offset values are added to the current
thermistor reading and are then used by the control
board to determine cooling and defrost cycle times.
Offsets have a range of +/- 10°F. Corrected values
may
be viewed through the customer “All Temps”
menu.
Up
Select
Down
RETURN TO MENU
INPUT STATUS
DOOR OPEN
IN2 OPEN
Up
Select
Down
RETURN TO MENU
OUTPUTS
EVAP FAN=0%
CONDENSER FAN=0%
Up
Select
Down
RETURN TO MENU
OFFSETS
ZONE = 1°F
EVAP = 1°F
Can be displayed in Celsius
.
and
.
and