U-Line 3024DWR, Руководство пользователя и сервисное руководство

Страница: 17 / 68

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Drawers 1
USER GUIDE
u-line.com
Drawers
CHECKING DRAWER ALIGNMENT
The unit’s drawers are aligned at the factory before
shipment. However, their alignment could have been
disturbed during shipment or during overlay panel
installation. Check each drawer to confirm that it is
aligned:
•
Side-to-Side
— When viewed from the top, the
drawer front should be square with the sides of the
cabinet.
•
Front-to-Back
— When viewed from the side,
the
drawer front should be
straight with the cabinet’s
sides, not cocked forward
or back.
•
Top-to-Bottom
—
When viewed from the front, the drawer should be
level horizontally.
ADJUSTING DRAWER ALIGNMENT
WARNING
SHOCK HAZARD — The unit must be unplugged
from the wall outlet during drawer removal,
adjustment and re-installation.
DRAWER REMOVAL
1. Confirm that the unit is
unplugged from wall
outlet
2. Remove the mounting
screws.
3. Pull the drawer completely out of the unit.
CAUTION
Use care when handling the drawer. Drawer
edges, drawer rail and the unit’s slide may be
sharp.
NOTICE
Drawer adjustments are made by moving the
slide that carries the drawer’s rail. Minor
adjustments may be made by loosening one of
the slide’s mounting screws, adjusting the slide
and retightening the screw. Severe adjustments
may be made by removing the sl
ides’ mounting
screws, drilling new mounting holes and
remounting the slide.
SIDE-TO-SIDE ADJUSTMENT
The drawer will need a Sideto-Side Adjustment if,
when viewed from the top, the drawer front is not
square with the sides of the cabinet. This is caused by
one of the slides being mounted too far forward on the
unit’s liner.
Minor Adjustment: